深圳市高顺光电有限公司
语言选择: 中文版 ∷  英文版

Bus on-board led display

  • vehicle led sign internal display screen system for bus destination route and terminal
  • vehicle led sign internal display screen system for bus destination route and terminal
  • vehicle led sign internal display screen system for bus destination route and terminal
vehicle led sign internal display screen system for bus destination route and terminalvehicle led sign internal display screen system for bus destination route and terminalvehicle led sign internal display screen system for bus destination route and terminal

vehicle led sign internal display screen system for bus destination route and terminal

  • useage:internal led display sign
  • color:Yellow,RED,RGB
  • LED:Super brightness
  • DVR and bus stop anncouner
  • Product description: vehicle front led display screen sign system for bus destination route and terminal
  • INQUIRY

    vehicle led sign internal display screen system for bus destination route and terminal  Key Features

    vehicle led display

    bus led screen

    1:Using High quality LED Lamp,with DIP LED and SMD LED;

    2: Size available P8*P10, P7.62, P8.2, P12.5, P10,P8,P6,P5,P4,P3 customer tailor-design available.

    3: Amber is the typical monochrome LED colour ,Other colors Red/Yellow/Green/full color available

    4: Wide viewing angle to assist roadside legibility

    5: Multi-lingual, text and graphics displays capability, fixed, alternating or scrolling displays mode

    6: Multi mode partition-dividing styles providing screen partition, displaying bus line number, starting station, terminal station, destination signs etc.

    7: Storing more than 1000 bus lines information,

    8: providing RS232/ RS485/RJ45/WIFI communication,

    9: Protocol could be customized according to customers’ request.

    10:8-36V wide voltage design, low power consumption, energy conservation and environmental protection

    11: Light weight, robust aluminum casing for easy installation


on-board led display sysytem

Solution A


bus destination led sign system

GPS automatic bus stop announcer+ LED displays(front, side, rear and internal) When many displays are needed in a bus (front, side, rear, external), it is better to choose this solution. In this case, bus stop announcer and display work through the GPS, which enables the switching of messages on displays and broadcasts to be automatic. Besides, it will relieve the burden of drivers and lower the risks of traffic accidents. For this solution, an microphone is available, through which drivers broadcast.


Solution B

bus led screen

GPS Vehicle scheduling system + LED display Nowadays there are GPS tracker and DVR on most of buses, through RS232 & RS485, our LED display can be connected with those devices. The display carries its own font library and it is controlled by DVR system. ASCII nuicode and GB code is available for the display.

The DVR also can connect with monitoring、camare、4G for command center、coin machine etc....

Solution C

bus led display

When the display is just as a route reminder or not change route frequently,, it will be a good solution for you. The message can be updated by U disk, and contents on display can be switched by pressing the buttons(UP, DOWN, or Number). It is easy to install and operate.

terminal led display

  • Integration of aluminum mold design, ultra-thin and beautiful, delicate, convenient to install. (also can be cabinet design)
  • Using 10 mil counter electrode import wafer high brightness LED chips, ensure the brightness、brilliance, light decay and longer life-time in the sun.
  • All products use 55 degree high purity tin to ensure the fullness and long-term stability of each component solder joint.
  • It adopts 1.6MM ultra-thick PCB design to ensure that the product is not deformed, heat dissipation and stability are stronger.
  • It adopts constant current drive and special power supply for constant current vehicle screen. The constant current design has the functions of delay and short circuit protection, which can better protect the life of LED lamp beads. .
  • the power cord adopts industrial-grade international standards.
  • wide voltage design of the angular DC:9V-36V can withstand the instantaneous 90V shock..route led sign
    The hardware delay startup function of the constant current power supply. .
  • The output voltage of the power supply is protected.
  • components should use the design, such as resistance to high temperature and high pressure power device for heat treatment, circuit boards, such as high pressure plate using moistureproof processing.
  • all material USES the level where V0 fire rating.
  • can partition display, to display the name and at the same time the bus route. Can at the same time in different areas of the control and single control content and docking stops are updated in real time.
  • have a variety of languages to choose from, and each program every word can be set separately using a different font.
  • can show simple images and animations.
  • all products often strict test and 24 hours aging, ensure that customers get products are qualified fine products.

bus led display screen vehicle front led display screen sign system for bus destination route and terminal

bus destination led sign