Outdoor Rental LED Screen
| Pixel Pitch | P2.604-P2.976-P3.91-P4.81-P5.95 |
|---|---|
| Cabinet size | 500*500 mm,500*1000 mm |
| Module size: | 250*250mm |
| Refresh rate: | 1920-3840Hz |
| Power: | Max:800W/sqm,Avg:250W/sqm |
| Waterproof : | IP65 |
| Brightness: | 4000-6000cd |
| Input Voltage: | 110-220V |
TSLED Outdoor Rental LED Screen Advantages?
Stability and reliability
Thermal design: Good thermal design can extend the service life of the display. Use efficient heat sinks, cooling fans or liquid cooling to ensure that the temperature of core components such as LED lamp beads is within a reasonable range during operation. For example, some large LED displays have multiple cooling fans installed on the back to discharge the internal heat in a timely manner to ensure that the display can work stably for a long time.
Power supply: Equipped with a stable and reliable power supply system with overvoltage, overcurrent and short-circuit protection functions. For example, using a redundant power supply design, when one power supply fails, the other power supply can continue to provide power to ensure the normal operation of the display. At the same time, the power conversion efficiency must be high to reduce energy loss.
Component quality and durability: Use high-quality LED lamp beads, driver chips and other electronic components to ensure the durability of the display during frequent rental use. For example, high-quality LED lamp beads have longer service life and more stable luminous performance, which can reduce problems such as dead pixels and brightness attenuation.
Brightness and contrast: The outdoor environment has strong light, the display brightness is 4500CD, and the contrast ratio reaches 3000:1, which ensures clear images and bright colors under strong light.
Protection level: The waterproof level reaches at least IP65, and the dustproof level reaches IP6X to resist the erosion of rain, dust, wind and sand and other natural factors. At the same time, the windproof performance of the display screen should be considered to ensure that it can stand stably under a certain wind speed to avoid potential safety hazards.
Viewing angle: The horizontal viewing angle should be close to 180°, and the vertical viewing angle should be no less than 140°, allowing viewers from all directions to see the screen content. For example, at a large outdoor music festival, the audience is distributed around the stage, and the wide viewing angle ensures that everyone can enjoy the performance images and special effects on the stage background screen.
How TSLED Rental LED Screens Designed?
All LED Lamp solder joints are enlarged to ensure strong welding and not easy to knock off the lamp.
Folding corner guards are used around the box, which can better protect the LED Lamp from being bumped during transportation and handling.
All rental LED display modules are reinforced with AOB dispensing technology, which greatly enhances the thrust of the LED Lamp.
LED modules, LED power supplies, and LED controllers are connected using a HUB board, which greatly reduces communication failures caused by aging and damage to wires.
Rental LED display screen realizes front and rear maintenance, and can quickly replace LED modules and power control boxes
The use of high-end outdoor lamp beads with high brightness and airtightness ensures that the rental LED display screen can still work stably in harsh outdoor environments.
- Outdoor Rental LED Screen Datasheets
- Indoor LED Screen Rental Datasheets
| Rental outdoor | TRO-2.604 | TRO-2.976 | TRO-3.91 | TRO-O4.81 | TRO-O5.95 |
| Pixel pitch(mm) | 2.604 | 2.976 | 3.91 | 4.81 | 5.95 |
| Pixel Density(dot/m2) | 112910 | 112910 | 65746 | 43264 | 28224 |
| LED Type | SMD 1415 | SMD 1415 | SMD 1921 | SMD 1921/2727 | SMD 2727 |
| Module Size(W x H x D)mm | 250 x 250 | ||||
| Module resolution(W x H) | 96 x 96 | 84 x 84 | 64 x 64 | 52 x 52 | 42 x 42 |
| Module Weight(Kg) | 0.65 | 0.65 | 0.62 | 0.6 | 0.6 |
| Diver Mode(Scan) | 24Scan | 21Scan | 16Scan | 13Scan | 7Scan |
| Brightness(cd/m2) | ≥4,500 | ≥4,500 | ≥4,800 | ≥5000 | ≥5500 |
| Grey Scale(bits) | 16 | 16 | 16 | 16 | 16 |
| Refresh Rate(Hz) | ≥1,920 | ≥1,920 | ≥1,920 | ≥1,920 | ≥1,920 |
| Cabinet Size(W x H x D)mm | 500 x 500 x 85 500 x 1000 x 85 | ||||
| Cabinet Weight(Kg/Cabinet) | 7.5/14 | 7.5/14 | 7.5/14 | 7.5/14 | 7.5/14 |
| Max Power(W/m2) | 800 | 800 | 800 | 800 | 800 |
| Average Power(W/m2) | 300 | 300 | 300 | 300 | 300 |
| View Angle(H°/V°) | 160°/160° | 160°/160° | 160°/160° | 160°/160° | 160°/160° |
| Mini View Distance(m) | 2 | 3 | 3 | 4 | 5 |
| Operating Use Temperature(℃) | -20℃~60℃ | ||||
| Storage Use Temperature(℃) | -20℃~60℃ | ||||
| Input Voltage(V) | 100~240V | ||||
| Input Power Frequency(Hz) | 50Hz~60Hz | ||||
| Failure Rate | ＜1/100,1000 | ||||
| Signal Input Format | SDI, RGBHV,YUV,YC,Composite,HDMI,DVI,SD/HD-SDI etc. | ||||
| Life Time(hrs) | 100000 | ||||
| IP Level(front/rear) | IP65/IP65 | ||||
| Indoor rental series | TRI-1.95 | TRI-2.6 | TRI-2.84 | TRI-2.97 | TRI-3.91 | TRI-4.81 |
| Pixel pitch(mm) | 1.95 | 2.604 | 2.84 | 2.976 | 3.91 | 4.81 |
| Pixel Density(dot/m2) | 262144 | 147456 | 123904 | 112896 | 65746 | 43264 |
| LED Type | SMD 1515 | SMD1515 | SMD2121 | SMD 2121 | SMD 2121 | SMD 2121 |
| Module Size(W x H x D)mm | 250 x 250 | 250 x 250 | 250 x 250 | 250 x 250 | 250 x 250 | 250 x 250 |
| Module resolution(W x H) | 128 x 128 | 96 x 96 | 88 x 88 | 84 x 84 | 64 x 64 | 52 x 52 |
| Module Weight(Kg) | 0.5 | 0.5 | 0.5 | 0.45 | 0.45 | 0.45 |
| Diver Mode(Scan) | 1/32 | 1/32 | 1/22 | 1/28 | 1/16 | 1/13 |
| Brightness(cd/m2) | ≥800 | ≥800 | ≥800 | ≥800 | ≥1,000 | ≥1,000 |
| Grey Scale(bits) | 16 | 16 | 16 | 16 | 16 | 16 |
| Refresh Rate(Hz) | ≥3,840 | ≥3,840 | ≥3,840 | ≥3,840 | ≥1,920 | ≥1,920 |
| Cabinet Size(W x H x D)mm | 500 x 500 x 85 500 x 1000 x 85 | |||||
| Cabinet Weight(Kg/Cabinet) | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
| Max Power (W/m2) | 800 | 800 | 800 | 800 | 800 | 800 |
| Average Power(W/m2) | 300 | 300 | 300 | 300 | 300 | 300 |
| View Angle(H°/V°) | 160°/160° | |||||
| Mini View Distance(m) | 1 | 2 | 2 | 3 | 4 | 5 |
| Operating Use Temperature(℃) | -20℃~60℃ | |||||
| Storage Use Temperature(℃) | -20℃~60℃ | |||||
| Input Voltage(V) | 100~240V | |||||
| Input Power Frequency(Hz) | 50Hz~60Hz | |||||
| Failure Rate | ＜1/100,1000 | |||||
| Signal Input Format | SDI, RGBHV,YUV,YC,Composite,HDMI,DVI,SD/HD-SDI etc. | |||||
| Life Time(hrs) | 100000 | |||||
| IP Level(front/rear) | IP43/IP43 | |||||
ARC Outdoor Rental LED Screen
Ultra-light die-cast.
Cabinet size: 500mm x 500mm/500mm x 1000mm can be mixed and matched.
Modular design of LED modules, power boxes, and panel frames.
Can be assembled on concave and convex curves and 90-degree right angles.
Suspended and stacked installations.
Refresh rate (HZ): 3840Hz/7680HZ
Brightness: 4500CD/6000CD
Related Product
One-Stop Solution for Outdoor Rental LED Screen Needs.
How to maintain Outdoor rental LED Screen？
The maintenance of rental LED displays is crucial to extending their service life and maintaining good display effects. The following are specific maintenance methods and precautions:
Stable power supply: Make sure the power supply is stable and the grounding protection is good. In severe weather such as lightning and heavy rain, the power supply should be cut off.
Moisture-proof and dust-proof: Avoid water entering the display or contact with conductive metal objects to prevent short circuit and damage. If water enters the screen, cut off the power immediately and contact maintenance personnel.
Environmental humidity: Keep the humidity of the use environment at a moderate level to prevent moisture from entering the inside of the display.
Regular cleaning:
Use a soft brush, vacuum cleaner, or special cleaner to clean the screen surface regularly to avoid dust accumulation that affects the display effect.
Avoid using cleaners containing alcohol or acids when cleaning to avoid damaging the screen coating.
Cleaning steps include dust removal, wet cleaning, drying, etc. The specific operation requires selecting appropriate tools and cleaning agents according to the type of display.
Module maintenance:
Regularly check the connection lines of the LED module to ensure that the connection is stable.
Avoid displaying solid color images for a long time to avoid damage to the LED lamp beads due to excessive current.
Regular inspection:
Check whether the power cord and signal cable are loose or aged, and make sure the connection is firm.
Turn on the screen at least once a month and light it for more than 2 hours to maintain device performance.
Switching sequence: turn on the control computer first, then turn on the display; when closing, turn off the display first, then turn off the computer.
Avoid long-term use: It is recommended to rest the display for at least 2 hours a day and use it at least once a week during the rainy season.
Avoid frequent switching: Do not frequently turn off and on the display to avoid excessive current that may damage the LED lamp beads.
Professional maintenance: Equipped with professional maintenance personnel and regular training to ensure that unexpected problems can be dealt with quickly.
Use soft cloth, vacuum cleaner, sprayer, pneumatic brush and other tools for cleaning. Cleaner selection: Use a non-corrosive, alcohol-free cleaner specifically designed for LED displays. Cleaning steps: Vacuum: Remove dust from the display surface. Wet cleaning: Use detergent to gently wipe the screen. Drying: Use a dry cloth or vacuum cleaner to absorb any traces of water.
If water enters the screen, immediately cut off the power and contact maintenance personnel, and wait for the screen to dry before use. Lightning protection measures: Take lightning protection measures during installation, such as installing lightning rods or using lightning protection equipment.